Rule Configuration: User Defined Service Rule Configuration - ZyXEL Communications NBG5715 User Manual

Chapter 19 Bandwidth Management
Table 64 Management > Bandwidth MGMT > Advance (continued)
LABEL
Priority
Category
Service
User-defined Service
User-defined
Service
#
Enable
Direction
Service Name
Category
Modify
Direction
Service Name
Category
Modify
Apply
Cancel

19.5.1 Rule Configuration: User Defined Service Rule Configuration

If you want to edit a bandwidth management rule for other applications or services, click the Edit
icon in the User-defined Service table of the Advanced screen. The following screen displays.
146
DESCRIPTION
Select a priority from the drop down list box. The lower the number, the higher
the priority.
• Select higher priority for voice traffic or video that is especially sensitive to
jitter (jitter is the variations in delay).
• Select medium priority for "excellent effort" or better than best effort and
would include important business traffic that can tolerate some delay.
• Select lower priority for non-critical "background" traffic such as bulk
transfers that are allowed but that should not affect other applications and
users.
This is the category where a service belongs.
This is the name of the service.
Select the check box to have the NBG5715 apply this bandwidth management
rule.
Use this table to allocate specific amounts of bandwidth to specific applications
or services you specify.
This is the number of an individual bandwidth management rule.
Select this check box to have the NBG5715 apply this bandwidth management
rule.
From WAN applies bandwidth management to traffic from LAN/WLAN to WAN
(i.e., uplink).
From LAN&WLAN applies bandwidth management to traffic that the NBG5715
forwards to both the LAN and the WLAN.
Enter a descriptive name for the bandwidth management rule.
Select a the category where a service belongs.
Click the Edit icon to open the Rule Configuration screen. Modify an existing
rule or create a new rule in the Rule Configuration screen. See
on page 146 for more information.
Click the Remove icon to delete a rule.
Select To LAN&WLAN to apply bandwidth management to traffic from WAN to
LAN and WLAN.
Select To WAN to apply bandwidth management to traffic from LAN/WLAN to
WAN.
Enter a descriptive name for the bandwidth management rule.
This is the category where a service belongs.
Click the Edit icon to open the Rule Configuration screen. Modify an existing
rule or create a new rule in the Rule Configuration screen. See
on page 146 for more information.
Click the Remove icon to delete a rule.
Click Apply to save your customized settings.
Click Cancel to begin configuring this screen afresh.
Section 19.5.1
Section 19.5.1
NBG5715 User's Guide