Status Screen In Easy Mode - ZyXEL Communications NBG6716 User Manual

The following table describes the labels in this screen.
Table 17 Wireless Security: WPS
LABEL
Wireless Security
WPS
Register
Exit

5.7 Status Screen in Easy Mode

In the Network Map screen, click Status to view read-only information about the NBG6716.
Figure 31 Status Screen in Easy Mode
The following table describes the labels in this screen.
Table 18 Status Screen in Easy Mode
ITEM
Name
Time
WAN IP
MAC Address
Firmware Version
Chapter 5 Easy Mode
DESCRIPTION
Click this to go back to the Wireless Security screen.
Create a secure wireless network simply by pressing a button.
The NBG6716 scans for a WPS-enabled device within the range and performs wireless
security information synchronization.
Note: After you click the WPS button on this screen, you have to press a similar button in
the wireless station utility within 2 minutes. To add the second wireless station, you
have to press these buttons on both device and the wireless station again after the
first 2 minutes.
Create a secure wireless network simply by entering a wireless client's PIN (Personal
Identification Number) in the NBG6716's interface and pushing this button.
Type the same PIN number generated in the wireless station's utility. Then click Register
to associate to each other and perform the wireless security information synchronization.
Click Exit to close this screen.
DESCRIPTION
This is the name of the NBG6716 in the network.
This is the current system date and time.
The date is in YYYY:MM:DD (Year-Month-Day) format. The time is in HH:MM:SS
(Hour:Minutes:Seconds) format.
This is the IP address of the WAN port.
This is the MAC address of the NBG6716.
This shows the firmware version of the NBG6716.
The firmware version format shows the trunk version, model code and release
number.
NBG6716 User's Guide
40