20.1 Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your NBG5715 from a remote location through the
following interfaces:
• LAN and WAN
• LAN only
• WAN only
Note: The NBG5715 is managed using the Web Configurator.
20.2 What You Can Do in this Chapter
• Use the WWW screen to define the interface/s from which the NBG5715 can be managed
remotely using the web and specify a secure client that can manage the NBG5715
on page
150) .
• Use the TELNET screen to define the interface/s from which the NBG5715 can be managed
remotely using Telnet service and specify a secure client that can manage the NBG5715
20.5 on page
20.3 What You Need to Know
Remote management over LAN or WAN will not work when:
The IP address in the Secured Client IP Address field
1
the client IP address. If it does not match, the NBG5715 will disconnect the session immediately.
There is already another remote management session. You may only have one remote
2
management session running at one time.
There is a firewall rule that blocks it.
3
20.3.1 Remote Management and NAT
When NAT is enabled:
NBG5715 User's Guide
150).
C
HAPTER
Remote Management
(Section 20.4 on page
2 0
(Section 20.4
(Section
150) does not match
149