Time/Date Edit; Resetting The Nbg5715; How To Use The Reset Button - ZyXEL Communications NBG5715 User Manual

The following table describes the labels in this screen.
Table 8 Change Weather
LABEL
o o
C or F
Change Location
Finish

4.2.3 Time/Date Edit

One timezone can cover more than one country. You can choose a particular country in which the
NBG5715 is located and have the NBG5715 display and use the current time and date for its logs.
Click the
Figure 12 Change Password Screen
The following table describes the labels in this screen.
Table 9 Change Password Screen
LABEL
Change time zone Select the specific country whose current time and date you want the NBG5715
Finish
Note: You can also edit the timezone in

4.3 Resetting the NBG5715

If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the RESET button at the back of the NBG5715 to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously saved, the password
will be reset to "1234" and the IP address will be reset to "192.168.1.1".

4.3.1 How to Use the RESET Button

Make sure the power LED is on.
1
Press the RESET button for longer than 1 second to restart/reboot the NBG5715.
2
Press the RESET button for longer than 5 seconds to set the NBG5715 back to its factory-default
3
configurations.
NBG5715 User's Guide
DESCRIPTION
Choose which temperature unit you want the NBG5715 to display.
Select the location for which you want to know the weather. If the city you want
is not listed, choose one that is closest to it.
Click this to apply the settings and refresh the date and time display.
icon to change the Weather display.
DESCRIPTION
to display.
Click this to apply the settings and refresh the weather display.
Chapter 4 Introducing the Web Configurator
Section 22.5 on page 161.
31