Status Screen In Easy Mode - ZyXEL Communications NBG6503 User Manual

Figure 39 Wireless Security: WPS
The following table describes the labels in this screen.
Table 23 Wireless Security: WPS
LABEL
Wireless
Security
WPS
Register
Exit

6.7 Status Screen in Easy Mode

In the Network Map screen, click Status to view read-only information about the NBG.
Chapter 6 Easy Mode
DESCRIPTION
Click this to go back to the Wireless Security screen.
Create a secure wireless network simply by pressing a button.
The NBG scans for a WPS-enabled device within the range and performs wireless security
information synchronization.
Note: After you click the WPS button on this screen, you have to press a similar button in the
wireless station utility within 2 minutes. To add the second wireless station, you have
to press these buttons on both device and the wireless station again after the first 2
minutes.
Create a secure wireless network simply by entering a wireless client's PIN (Personal
Identification Number) in the NBG's interface and pushing this button.
Type the same PIN number generated in the wireless station's utility. Then click Register to
associate to each other and perform the wireless security information synchronization.
Click Exit to close this screen.
NBG6503 User's Guide
53