Firmware Upgrade Screen - ZyXEL Communications NBG5715 User Manual

Chapter 22 Maintenance
Table 71 Maintenance > Time (continued)
LABEL
Get from Time
Server
User Defined Time
Server Address
Time Zone Setup
Time Zone
Daylight Savings
Start Date
End Date
Apply
Cancel

22.6 Firmware Upgrade Screen

Find firmware at
extension, e.g., "NBG5715.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
162
DESCRIPTION
Select this radio button to have the NBG5715 get the time and date from the
time server you specified below.
Select User Defined Time Server Address and enter the IP address or URL
(up to extended ASCII characters in length) of your time server. Check with
your ISP/network administrator if you are unsure of this information.
Choose the time zone of your location. This will set the time difference
between your time zone and Greenwich Mean Time (GMT).
Daylight saving is a period from late spring to early fall when many countries
set their clocks ahead of normal local time by one hour to give more daytime
light in the evening.
Select this option if you use Daylight Saving Time.
Configure the day and time when Daylight Saving Time starts if you selected
Daylight Savings. The o'clock field uses the 24 hour format. Here are a
couple of examples:
Daylight Saving Time starts in most parts of the United States on the first
Sunday of April. Each time zone in the United States starts using Daylight
Saving Time at 2 A.M. local time. So in the United States you would select
First, Sunday, April and type 2 in the o'clock field.
Daylight Saving Time starts in the European Union on the last Sunday of
March. All of the time zones in the European Union start using Daylight Saving
Time at the same moment (1 A.M. GMT or UTC). So in the European Union
you would select Last, Sunday, March. The time you type in the o'clock field
depends on your time zone. In Germany for instance, you would type 2
because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Configure the day and time when Daylight Saving Time ends if you selected
Daylight Savings. The o'clock field uses the 24 hour format. Here are a
couple of examples:
Daylight Saving Time ends in the United States on the last Sunday of October.
Each time zone in the United States stops using Daylight Saving Time at 2
A.M. local time. So in the United States you would select Last, Sunday,
October and type 2 in the o'clock field.
Daylight Saving Time ends in the European Union on the last Sunday of
October. All of the time zones in the European Union stop using Daylight
Saving Time at the same moment (1 A.M. GMT or UTC). So in the European
Union you would select Last, Sunday, October. The time you type in the
o'clock field depends on your time zone. In Germany for instance, you would
type 2 because Germany's time zone is one hour ahead of GMT or UTC
(GMT+1).
Click Apply to save your changes back to the NBG5715.
Click Cancel to begin configuring this screen afresh.
www.zyxel.com in a file that (usually) uses the system model name with a "*.bin"
NBG5715 User's Guide