Wireless Security Modes; No Security; Wep Encryption - ZyXEL Communications NBG5715 User Manual

11.3 Wireless Security Modes

11.3.1 No Security

Select No Security to allow wireless clients to communicate with the access points without any
data encryption.
Note: If you do not enable any wireless security on your NBG5715, your network is
accessible to any wireless networking device that is within range.
Figure 44 Network > Wireless LAN 2.4G/5G > Security: No Security
The following table describes the labels in this screen.
Table 29 Network > Wireless LAN > Security: No Security
LABEL
Security Mode
Apply
Cancel

11.3.2 WEP Encryption

WEP encryption scrambles the data transmitted between the wireless stations and the access points
to keep network communications private. It encrypts unicast and multicast communications in a
network. Both the wireless stations and the access points must use the same WEP key.
Your NBG5715 allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can
be enabled at any one time.
Select Static WEP from the Security Mode list.
NBG5715 User's Guide
DESCRIPTION
Choose No Security from the drop-down list box.
Click Apply to save your changes back to the NBG5715.
Click Cancel to reload the previous configuration for this screen.
Chapter 11 Wireless LAN
81