Port Forwarding Edit Screen - ZyXEL Communications NBG5715 User Manual

Chapter 14 NAT
Table 46 Network > NAT > Port Forwarding (continued)
LABEL
Apply
Cancel

14.3.1 Port Forwarding Edit Screen

This screen lets you create or edit a port forwarding rule. Click the Add Port Forward button or a
rule's Edit icon in the Port Forwarding screen to open the following screen.
Figure 65 NAT > Port Forwarding Edit
The following table describes the labels in this screen.
Table 47 NAT > Port Forwarding Edit
LABEL
Port Forwarding
Service Name
Protocol
Port
Server IP
Address
Back
Apply
Cancel
104
DESCRIPTION
Click Apply to save your changes back to the NBG5715.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Select Enable to turn on this rule and the requested service can be forwarded to
the host with a specified internal IP address.
Select Disable to disallow forwarding of these ports to an inside server without
having to delete the entry.
Type a name (of up to 31 printable characters) to identify this rule in the first field
next to Service Name. Otherwise, select a predefined service in the second field
next to Service Name. The predefined service name and port number(s) will
display in the Service Name and Port fields.
Select the transport layer protocol supported by this virtual server. Choices are
TCP, UDP, or TCP&UDP.
If you have chosen a pre-defined service in the Service Name field, the protocol
will be configured automatically.
Type a port number(s) to define the service to be forwarded to the specified
server.
To specify a range of ports, enter a hyphen (-) between the first port and the last
port, such as 10-.
Type the IP address of the server on your LAN that receives packets from the
port(s) specified in the Port field.
Click Back to return to the previous screen.
Click Apply to save your changes back to the NBG5715.
Click Cancel to begin configuring this screen afresh.
NBG5715 User's Guide