The Advanced Screen - ZyXEL Communications NBG5715 User Manual

Chapter 10 WAN
The following table describes the labels in this screen.
Table 25 Network > WAN > Broadband: PPPoE
LABEL
ISP Parameters for Internet Access
Encapsulation
PPP Information
PPP Username
PPP Password
PPP Auto
Connect
IDLE Timeout
PPPoE Service
Name
WAN IP Address Assignment
Get
automatically
from ISP
Use Fixed IP
Address
My WAN IP
Address
DNS Server
First DNS Server
Second DNS
Server
Apply
Cancel

10.5 The Advanced Screen

To change your NBG5715's advanced WAN settings, click Network > WAN > Advanced. The
screen appears as shown. You can use this screen to enable multicast.
72
DESCRIPTION
Select PPPoE if you connect to your Internet via dial-up.
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Select this option if you do not want the connection to time out.
This value specifies the time in minutes that elapses before the router
automatically disconnects from the PPPoE server.
Enter the name of your PPPoE service here.
Select this option If your ISP did not assign you a fixed IP address. This is the
default selection.
Select this option If the ISP assigned a fixed IP address.
Enter your WAN IP address in this field if you selected Use Fixed IP Address.
Select From ISP if your ISP dynamically assigns DNS server information (and the
NBG5715's WAN IP address). The field to the right displays the (read-only) DNS
server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS
server's IP address in the field to the right. If you chose User-Defined, but leave
the IP address set to 0.0.0.0, User-Defined changes to None after you click
Apply. If you set a second choice to User-Defined, and enter the same IP
address, the second User-Defined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not configure
a DNS server, you must know the IP address of a computer in order to access it.
Click Apply to save your changes back to the NBG5715.
Click Cancel to begin configuring this screen afresh.
NBG5715 User's Guide