Status Screen In Easy Mode - ZyXEL Communications NBG6503 User Manual

6.7 Status Screen in Easy Mode

In the Network Map screen, click Status to view read-only information about the Router.
Figure 39 Status Screen in Easy Mode
The following table describes the labels in this screen.
Table 24 Status Screen in Easy Mode
ITEM
Name
Time
WAN IP
MAC Address
Firmware
Version
Wireless 2.4G
Network Name
Security
Wireless 5G
Network Name
Security
NBG6503 User's Guide
DESCRIPTION
This is the name of the Router in the network. You can change this in the Maintenance >
General screen in Section 22.3 on page
This is the current system date and time.
The date is in YYYY:MM:DD (Year-Month-Day) format. The time is in HH:MM:SS
(Hour:Minutes:Seconds) format.
This is the IP address of the WAN port.
This is the MAC address of the Router.
This shows the firmware version of the Router.
The firmware version format shows the trunk version, model code and release number.
This shows the SSID of the wireless 2.4G network. You can configure this in the Wireless
Security screen (Section 6.6.6 on page
This shows the wireless security used by the Router for the 2.4G wireless radio.
This shows the SSID of the wireless 5G network. You can configure this in the Wireless
Security screen (Section 6.6.6 on page
This shows the wireless security used by the Router for the 5G wireless radio.
155.
52; Section 10.3.1.1 on page
52; Section 10.3.1.1 on page
Chapter 6 Easy Mode
84).
84).
55