Leds - ZyXEL Communications NBG5715 User Manual

• Back up the configuration (and make sure you know how to restore it). Restoring an earlier
working configuration may be useful if the device becomes unstable or even crashes. If you
forget your password, you will have to reset the NBG5715 to its factory default settings. If you
backed up an earlier configuration file, you would not have to totally re-configure the NBG5715.
You could simply restore your last configuration.

1.5 LEDs

Look at the LED lights on the front panel to determine the status of the NBG5715. Use the LED
button at the side panel of the device to turn the LED lights on or off. If you have already pushed
the LED button to the ON position but none of the LEDS are on, make sure the NBG5715 is
receiving power and the power is turned on.
Note: The Power LED will be on even if you push the LED button to the OFF position.
This is for you to determine whether the NBG5715 is powered on.
Figure 2 LED Button
LED button
NBG5715 User's Guide
Chapter 1 Introduction
17