View Log; Dhcp Table - ZyXEL Communications NBG5715 User Manual

Chapter 5 Monitor and Summary

5.3.1 View Log

Use the View Log screen to see the logged messages for the NBG5715. The log wraps around and
deletes the old entries after it fills. Select what logs you want to see from the Display drop list. The
log choices depend on your settings in the Log Settings screen. Click Refresh to renew the log
screen. Click Clear to delete all the logs.
Figure 13 View Log
You can configure which logs to display in the View Log screen. Go to the Log Settings screen
and select the logs you wish to display. Click Apply to save your settings. Click Refresh to start the
screen afresh.
Figure 14 Log Settings

5.4 DHCP Table

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the NBG5715's LAN as a
DHCP server or disable it. When configured as a server, the NBG5715 provides the TCP/IP
configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
that network, or else the computer must be manually configured.
Click Monitor > DHCP Table or the DHCP Table (Details...) hyperlink in the Status screen.
Read-only information here relates to your DHCP status. The DHCP table shows current DHCP client
information (including MAC Address, IP Address, and Expiration time) of all network clients
using the NBG5715's DHCP server.
34
NBG5715 User's Guide