ZyXEL Communications NBG5715 User Manual page 88

Chapter 11 Wireless LAN
Note: With WPS, wireless clients can only connect to the wireless network using the first
SSID on the NBG5715.
Figure 51 Network > Wireless LAN 2.4G/5G > WPS
The following table describes the labels in this screen.
Table 36 Network > Wireless LAN 2.4G/5G > WPS
LABEL
WPS Setup
WPS
PIN Number
WPS Status
Status
Release
Configuration
802.11 Mode
SSID
Security
Apply
Cancel
88
DESCRIPTION
Select Enable to activate the WPS feature. Select Disable to turn it off.
This displays a PIN number last time system generated. Click Generate to
generate a new PIN number.
This displays Configured when the NBG5715 has connected to a wireless
network using WPS or when Enable WPS is selected and wireless or wireless
security settings have been changed. The current wireless and wireless security
settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or
wireless security changes on the NBG5715 or you click Release_Configuration
to remove the configured wireless and wireless security settings.
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings
for WPS connections on the NBG5715.
This is the 802.11 mode used. Only compliant WLAN devices can associate with
the NBG5715.
This is the name of the wireless network (the NBG5715's first SSID).
This is the type of wireless security employed by the network.
Click Apply to save your changes back to the NBG5715.
Click Cancel to reload the previous configuration for this screen.
NBG5715 User's Guide