Backup/Restore Screen - ZyXEL Communications NBG5715 User Manual

Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload
firmware to your NBG5715.
Figure 106 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 72 Maintenance > Firmware Upgrade
LABEL
File Path
Browse...
Upload
Note: Do not turn off the NBG5715 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the
NBG5715 again.
The NBG5715 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 107 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the
Firmware Upgrade screen.

22.7 Backup/Restore Screen

Backup configuration allows you to back up (save) the NBG5715's current configuration to a file on
your computer. Once your NBG5715 is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration changes. The
backup configuration file will be useful in case you need to return to your previous settings.
NBG5715 User's Guide
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to
find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
Chapter 22 Maintenance
163