ZyXEL Communications NBG5715 User Manual page 147

Figure 90 Bandwidth MGMT Rule Configuration: User-defined Service
The following table describes the labels in this screen.
Table 65 Bandwidth MGMT Rule Configuration: User-defined Service
LABEL
Destination Address
Destination Subnet
Netmask
Destination Port
Source Address
Source Subnet Netmask
Source Port
Protocol
Apply
Cancel
See Appendix E on page 237
NBG5715 User's Guide
DESCRIPTION
Enter the IP address of the destination computer.The NBG5715 applies
bandwidth management to the service or application that is entering this
computer.
Enter the subnet netmask of the destination of the traffic for which the
bandwidth management rule applies.
This is the port number of the destination that define the traffic type, for
example TCP port 80 defines web traffic.
Enter the IP address of the computer that initializes traffic for the
application or service. The NBG5715 applies bandwidth management to
traffic initiating from this computer.
Enter the subnet netmask of the computer initiating the traffic for which
the bandwidth management rule applies.
This is the port number of the source that define the traffic type, for
example TCP port 80 defines web traffic.
Select the protocol (TCP, UDP) for which the bandwidth management rule
applies.
Click Apply to save your customized settings.
Click Cancel to exit this screen without saving.
for commonly used services and port numbers
Chapter 19 Bandwidth Management
147