Applying Power To The Base Unit And Charging Station - Comdial Scout II User Manual

For fx, dxp, dxp plus systems

Hide thumbs Also See for Scout II:

Table of Contents

Installing Scout II

2.3 Applying Power to the Base Unit

and Charging Station

1. Using only the base unit AC adapter supplied with the Scout II,

plug the AC adapter cord into the AC adapter input jack on the

base unit. Route the cord through the strain relief channel.

Note: Use only the supplied base unit AC adapter: EXP9704.

2. Plug the EXP9704 AC adapter into a standard 120VAC wall

outlet.

3. IMPORTANT! Place the power cord so that it does not create a

trip hazard, or where it could become chafed and create a fire or

other electrical hazards.

Note: If you cannot plug the AC Adapter into the outlet, con-

tact someone about replacing the outlet.

Comdial

Jun '02

Table of Contents