Camping On At A Busy Station And Waiting For An Automatic Callback - Comdial Scout II User Manual

To tone call automatically,
1. lift handset and press Talk (if necessary),
2. press DSS button (called telephone will ring).
Note: The following instructions assume a voice-first default setting.
Any user can change a call to a tone signaling for that call simply by
pressing the Intercom button again after dialing the extension number
or by pressing the DSS button again.
To voice announce manually,
1. lift handset and press Talk (if necessary),
2. press button to select intercom (if necessary),
3. dial extension number,
4. speak your announcement.
To voice announce automatically,
1. lift handset and press Talk (if necessary),
2. press DSS button,
3. speak your announcement.
Some systems will be arranged so that certain stations have a hot line
feature. If your station is so arranged, every time you lift the handset,
your LCD speakerphone will automatically ring a pre-selected station
(programmed by the installer). To make an intercom call to a station
other than this hot line station, or to make a call on an outside line,
you must press an intercom or line button and dial the number.
3.7 Camping on at a Busy Station and
Waiting for an Automatic Callback
If you call another station and receive a busy signal or a Do Not
Disturb tone, you can press a button that will cause the system to ring
your telephone when the station is available. This is called "camping
on at a station." Please note that you can camp on to only one station
at a time.
Jun '02 Comdial
Scout II User's Guide
49