5. Plug the other end of the short telephone cord into the modular
wall jack.
6. Place the base unit on the posts of the wall plate and push down
until it is firmly seated.
7. Plug the AC Adapter into a standard 120V AC wall outlet.
Note: Do not use an outlet controlled by a wall switch.
2.4.2 MOUNTING BASE UNIT DIRECTLY ON WALL
If you do not have a standard wall plate, you can mount your base unit
directly on a wall. Before mounting your phone, consider the fol-
lowing:
• Select a location away from electrical cables, pipes, or other
items behind the mounting location that could cause a hazard
when inserting screws into the wall.
• Make sure the wall material is capable of supporting the weight
of the base unit.
• Use #10 screws with anchoring devices suitable for the wall
material where the Base Unit will be placed.
Jun '02
Comdial
Scout II User Guide
27