"Camping On" Busy Station Automatic Callback; Conference Calls - Comdial Impact 8024S User Manual

"Camping On" busy station automatic callback

Setting and using Camping On:
When you dial the station and you hear the busy signal, select "CAMP".
When your call is connected, your telephone will ring with 5 tone bursts.
Press "INTERCOM" or "ANS".
Cancel the call-back request:
Press "INTERCOM" and dial" *6".
Setting Camping On at a station on "Do Not Disturb":
Select "CAMP". When the station is no longer in DND, your call-back request
will go through.
Waiting (Queuing) for a line
When a line becomes available you will hear several short tone bursts.
When all lines are busy:
1. Press "INTECOM".
2. Dial the line group access code.
3. At the busy tone dial "*6".
To queue for a particular line:
1. Press "INTERCOM".
2. Dial "*6".
3. Press the desired line button.
Cancel queue:
1. Press "INTERCOM".
2. Dial "#6".

Conference Calls

Note: When setting up a conference call with both outside and inside phones,
you must connect the outside lines first.
Set up a conference call:
1. Make the first call.
2. Select "CONF" (call is placed on hold).
3. Select next line and make the next call.
4. Select "CONF" to establish conference.
5. Press "TRNS/CNF" to add more parties.
To continue conversing with one member of the conference after
other outside lines have dropped out:
1. Press "HOLD".
2. Press the line button of the remaining party.