Station-To-Station Messaging - Comdial 7OlOS System User's Manual

"cz,,",, qj ,~.I IU , ,""I. r.. .a
._-.- _ ---_.~ "
Station-To-Station Messaging
When you call another telephone and no one answers, you may
leave a reminder that you have called. Do this by turning on the
BLF light at the called telephone. To allow this to take place, your
telephone must have previously been stored as a DSWBLF button
at the called telephone. If your telephone is not stored as a DSS
at the called telephone, your messaging call goes to the central
message desk, if one is programmed. The central message desk
(usually the system attendant) takes your message and turns on
the message waiting light of the telephone that you originally
called.
To turn on message light,
l
make intercom call and receive no answer,
l
dial +N 7 (BLF light at called station flutters).
To turn off message light,
l
press ITCM,
l
dial#7,
l
dial extension number of telephone. DSWBLF light turns
Off.
If you are the recipient of a station-to-station message reminder
(a BLF light is fluttering), answer it as follows:
l
press DSS button associated with lighted BLF light.
47