Station-To-Station Messaging - Comdial ExecuTech System 2000 User Manual

LCD Messaging (continued). . .
To turn off message,
Press KM .
0
Dial a (@
0
2
. ABC
Station-To-Station Messaging.. .
When a station-to-station call is attempted and the called station
rings without answer, the calling station may choose to leave a
message indication at the called station. If the called station has
busy lamp appearance of the calling station, use of this messaging
feature will activate the lamp. If the called station does not have
busy lamp appearance of the calling station, use of this feature will
result in immediate transfer, of the calling station, to the central
message desk. The Central Message desk will take the message
and light the message waiting lamp of the original called station.
To activate messaging,
l
Make intercom call and hear ring-back tone.
Display:
"Station Name" of called station.
0 Dial a
m, BLF light at called station turns
on.
NOTE: If
called
station does not have
Busy
Lamp Field ap-
pearance of your station, pressing * 7 results in imme-
diate transfer to a central message desk.
Continued on next page .
27