Dialing Manually - Comdial Scout II User Manual

With your station at idle, you can use the following procedure to auto-
matically dial a personal or system speed dial number that is stored at
a dial pad location:
1. lift handset and press Talk (if necessary),
2. dial code for desired personal speed dial number (0–9),
3. press * and then dial code for desired system speed dial
number (100 – 299),
Note: Remember, it is very common for your digital wireless tele-
phone to automatically select a line for your use when you lift the
handset and press Talk. Under these circumstances, you must first
select the intercom and press Tap before you can dial the code for a
speed dial number.

3.2 Dialing Manually

You can manually dial a number over any available telephone line or
intercom you select. Or, if the installer assigned a prime line, prime
intercom, or the idle line preference feature to your station, your
digital wireless telephone will automatically select a line for use
when you lift its handset.
To dial an outside number manually,
1. lift handset and press Talk (if necessary),
2. press line button to select line or intercom (remember: selecting
a line is not necessary if a prime line, prime intercom, or idle
line preference feature is assigned to your telephone),
3. listen for dial tone,
4. dial number.
Jun '02 Comdial
Scout II User's Guide
or–
45