Programming Your Telephone
dial 01-16 to select line group,
dial number (up to 16 digits long—include * and # if needed),
Note: You may need a pause between numbers to compensate
for differences in response time between your system and the
host system (ask your attendant about this). To store a pause,
press Hold, then continue dialing. If your system is behind a
host system that needs a hookflash to access a feature, press
Tap to store a hookflash, then continue dialing.
6. press T/C to store the number,
7. press next location button and store next number,
8. repeat previous steps until all numbers are stored,
or,
press Talk to end.
Note: Storing a new speed dial number at a button location over-
writes an existing speed dial number already stored there.
10.3 Programming DSS Numbers
To store an intercom number as a DSS number,
1. lift handset and press Talk (if necessary),
2. press intercom button (if necessary),
3. dial * * 3,
4. press function button or dial pad button to choose storage loca-
tion,
5. dial extension number,
6. press next location button and store next DSS number,
7. repeat the previous step until all DSS numbers are stored,
or,
press Talk to end.
98
Comdial
Jun '02