Sending A Paging Announcement - Comdial Scout II User Manual

To mute your telephone,
• press and hold MUTE (you can still hear the distant party's
voice).
To speak to the calling party,
• release MUTE.

8.10 Sending a Paging Announcement

There are several ways to make a public announcement to all or a
portion of your location. Your system might be arranged with an
external paging unit that you access by pressing a line button or by
dialing a special code. This unit sounds the announcement over an
external speaker unit.
Your system may provide an all-call or a zone page feature that you
access by dialing special codes. This arrangement sounds your voice
announcement through the telephone speakers. All-call sounds the
announcement through all telephones, while zone paging sounds it
only through those telephones located in a specific area. Check with
your system administrator to determine the type of paging and access
method that you should use.
To send a paging announcement,
1. lift handset and press Talk (if necessary),
2. press intercom button (if necessary),
3. dial 70 - 77 for zones 1 - 8 (when the system is operating in the
defaulted mode, zone 1 provides an all-call function),
4. make announcement, Note: To guard against the annoying
noise caused by audio feedback, do not stand near a paging
speaker while you deliver a page announcement.
Jun '02 Comdial
Scout II User's Guide
79