Wall Mounting The Base And Charger Units; Mounting Base Unit Using Standard Wall Plate - Comdial Scout II User Manual

Installing Scout II
2.4 Wall Mounting the Base and
Charger Units
2.4.1 MOUNTING BASE UNIT USING STANDARD
WALL PLATE
The Scout II is designed to be mounted on a standard AT&T or GTE
wall plate. To attach the wall mount stand to the base unit, perform
the following steps.
1. Slide the wall mount stand into the notches at the top of the
base unit, push the wall mount stand down and snap it into
place.
2. Using only the base unit AC adapter supplied with the Scout II,
plug the AC adapter cord into the AC adapter input jack on the
base unit. Note: Use only the supplied base unit AC adapter:
EXP9704.
3. Place the AC Adapter cord inside the molded channel of the
wall mount stand.
4. Plug one end of the short telephone cord into the line jack on
the base unit. Then place the telephone cord inside the molded
channel on the bottom of the wall mount stand.
26 Comdial Jun '02