Table of Contents
Advertisement
Installing Scout II
2.1 Selecting the Installation Location
CAUTION
Your digital wireless telephone contains
special purpose circuitry that allows it to
operate only when it is connected to a proprietary digital tele-
phone system. Because of this special design, do not connect
your digital wireless telephone to a telephone company central
office jack that is designed for industry-standard telephones.
Select a location for the digital wireless telephone to avoid excessive
heat or humidity. Place the base unit of your digital wireless tele-
phone on a desk or tabletop near a standard 120V AC outlet and
within reach of the station jack. Keep the base unit and handset away
from sources of electrical noise (for example, motors, fluorescent
lighting, and similar devices). You may find that you can extend the
digital wireless telephone's operating range by locating the base unit
at an elevated height. An elevated location will allow the radio
signals to travel above nearby obstructions.
When you install your digital wireless telephone in an area where
other digital wireless telephones are in use, locate your base unit at
least 10 feet from adjacent base units.
22
Comdial
Jun '02
Advertisement
Table of Contents
