Table of Contents
Advertisement
To override a DND condition at another telephone,
1. make intercom call and hear DND tone,
2. dial * 0 3 (called party will hear several short tone bursts),
3. wait for a reply.
saving feature that turns off the display after
a short period of time. Be sure that you do not set and
forget a DND condition. If you do, the blanked display will
hide the displayed DND reminder from your view thus leaving
your telephone in DND mode without any visible reference.
8.12 Setting the Volume Controls
Your telephone has a push-button volume control. This is a multi-
purpose control that you can use to:
• change the handset volume during a call. There are four handset
loudness levels (and four levels on the optional headset as well).
• set the ringer loudness and tone types while in standby mode.
There are two ringer loudness levels, and three different tone
types plus a vibrator position.
Jun '02
CAUTION
Remember, your telephone has a power
Comdial
Scout II User's Guide
81
Advertisement
Table of Contents
