Overriding A Call Or A Do Not Disturb Condition At Another Telephone (Executive Override) - Comdial Scout II User Manual

The called party can place the current call on hold or disconnect from
the call to answer your call-waiting tone, or choose to ignore your
call-waiting tone and continue current conversation.
To cancel call waiting,
1. lift handset and press Talk (if necessary),
2. press button to select intercom,
3. press dial # 6,
4. your telephone automatically hangs up.
To answer a call-waiting tone if you receive one while on a call,
1. hear short tone burst in receiver,
2. either place current call on hold or complete call and hang up
(waiting call will ring at your telephone),
3. lift handset and press Talk to answer call.
You may, of course, choose to ignore the call-waiting tone and remain
on the line with your original caller.
3.9 Overriding a Call or a Do Not
Disturb Condition at Another
Telephone (Executive Override)
You can override a call in progress or a Do Not Disturb condition at
another telephone if the system installer has enabled the executive
override feature at your telephone. (If the feature is not enabled
through programming, an error tone will sound and screen options
will remain displayed.)
To override an in-progress call at another telephone,
1. make intercom call and hear a busy signal,
2. dial * 03 (all parties will hear several tone bursts),
3. join in-progress call.
Jun '02 Comdial
Scout II User's Guide
51