Table of Contents
Advertisement
Note: Storing a new DSS number at a button location overwrites an
existing DSS number already stored there.
10.4 Programming the Feature Codes
If you find that you are using certain features often, you can program
a feature's dialing code (such as * 5 2 to forward your calls) at an
unused function button. When you store a feature code, you automat-
ically provide a button that has an enable and a disable toggle
function. You can create access code buttons as you need them and as
unused function buttons are available.
Often, your installer will store a frequently-used feature at a function
button when he or she programs your telephone thus saving you the
trouble of doing it yourself. If he or she does this, you may be able to
overwrite that programming with some of your own; however, you
can not overwrite line and intercom assignments.
To store a feature code at a function button,
1. lift handset and press Talk (if necessary),
2. press intercom button (if necessary),
3. dial * * 3,
4. press unassigned function button F1–F4 to choose storage loca-
tion.
5. press programmable button for storage location,
6. dial access code for feature,
7. repeat last two steps until all features are programmed,
or,
press Talk to end.
Jun '02
Comdial
Scout II User's Guide
99
Advertisement
Table of Contents
