Table of Contents
Advertisement
Station Speed Dial Programming
Using the keypad digits, you may store frequently used telephone
numbers that only you will access. Before you begin, make a list
Of:
l
The storage location you are using (0 through 9 on the
keypad).
l
The line the call will go over.
l
The telephone numbers or feature codes you are storing.
Use the directory in the pullout index tray in front of your
telephone to store the list.
To program station speed dial numbers,
1. Press @
a
a
@
.
2. Press a keypad button (0 through 9) that you are using for
storage.
3. Choose the line to be used:
- 0 = last line used or prime line (if assigned)
- line key
- ITCM = intercom
- 1 through 4 = line groups
4. Dial the number to be stored (up to 16 digits); if you need
a pause between numbers, press the HOLD button.
5. Press c3 CONF to continue entering numbers.
6. Press @to
end.
Response Message Programming
This program lets you set up a button to be used for making a
non-verbal response to an OHVA, a SOHVA or an intercom call.
The response appears in the display of the calling station.
To assign a button for non-verbal response:
Continued
OR nexf page.
II
2. Press the programmable button you want to use for mes-
sage access.
32
Advertisement
Table of Contents
