Vibrate Mode - Comdial Scout II User Manual

For fx, dxp, dxp plus systems
Hide thumbs Also See for Scout II:
Table of Contents

Advertisement

Using The Other Telephone Features
indicates "Ringer Off" at this setting. Your final change becomes the
new default setting and will result in your telephone ringing at that
level for all future calls (until you change the default by repeating the
procedure).

Vibrate Mode

"Ring off" shown on the preceding graphic is the vibrate mode.
If you set the ringer off and the handset is not on the charger, the
handset will vibrate when there is an incoming call.
If you set the ringer off and the handset is on the charger, the handset
will ring as Ring Type-A Low.
Handset Ringer Switch
The switch on the side of the handset turns the handset ringer on or
off. When the switch on the side of the handset is turned off, you will
see the ring off icon.
When you turn the switch on the side of the handset on, the ring off
icon disappears.
84
Comdial
Jun '02

Advertisement

Table of Contents
loading

Table of Contents