Upgrading By Using The Web Interface; Quick Reference; Installing From The Local Repository - Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual

Upgrade Methods

Upgrading by Using the Web Interface

Quick Reference

Task
Back up WLSE.
1.
Download software from Cisco.com.
2.
Install software.
3.

Installing from the Local Repository

Step 1
Step 2
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
A-4
This section contains the following topics:
• Upgrade quick reference.
Alternative upgrade procedures:
•
Installing from the Local Repository, page A-4
–
Installing from a Windows Server, page A-6
–
The basic tasks in installing software upgrades by using the Web interface are
listed in below. See the referenced sections for details about these tasks.
Use this procedure to install from a local repository on the WLSE.
Procedure
Log in via Telnet or SSH as the admin user on a WLSE.
Specify the FTP site that will be the source of the software updates by entering
the following command:
repository source ftp:// source/path
where source is the hostname or IP address of the FTP server on which the image
resides and path is the path to the image files.
Appendix A Installing Software—CiscoWorks 1105/1130/1130-19
Reference
Backing Up the WLSE, page A-2
Downloading the Upgrade Image, page A-2
To install from the local repository, see
the Local Repository, page
To install from the remote repository, see
a Windows Server, page
Installing from
A-4.
Installing from
A-6.
78-16345-01