Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual page 134

Upgrade Methods
Reimaging the WLSE—Remote Installation Method
Note
Caution
Step 1
Step 2
Step 3
Step 4
Step 5
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
A-14
Although every effort has been made to validate the accuracy of the software
version on the Recovery CD, you must review the WLSE's software versions on
http://www.cisco.com
Readme files included with the updates to perform the update procedure.
This procedure will destroy all data and install a new image. You will need to
replace the data by restoring a backup. For information on backups, see the online
help or the User Guide for the CiscoWorks Wireless LAN Solution Engine, Release
2.7.
To reimage your WLSE, perform the following steps:
Insert the Recovery CD into the CD drive of a system running Microsoft
Windows 2000.
Double-click on the CD drive to display the contents of the Recovery CD.
Double-click on the autorun.bat file.
A command prompt window appears and as well as a pop-up window displaying
instructions for installing the Recovery CD.
Follow the installation instructions in the pop-up window.
Make sure you keep both the command prompt window and pop-up
Note
window open until the installation finishes.
Restore the backup.
For information about restoring backups, see the online help or the User Guide
for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.
Appendix A Installing Software—CiscoWorks 1105/1130/1130-19
and download any necessary software updates. See the
78-16345-01