Table of Contents
Advertisement
Upgrade Methods
Note
Caution
Reimaging the WLSE—Local Installation Method
Note
Caution
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
A-12
www.cisco.com/en/US/products/sw/cscowork/ps3915/prod_upgrades_and_down
loads.html
If you already have a recovery CD with the release of the WLSE software you
want to install, you can use the CD to upgrade your WLSE. Two methods for
upgrading from the Recovery CD are provided in this section:
Reimaging the WLSE—Local Installation Method, page A-12
•
Reimaging the WLSE—Remote Installation Method, page A-14
•
Although every effort has been made to validate the accuracy of the software
version on the recovery CD, you must review WLSE software versions on
Cisco.com and download and install any required earlier updates. For information
on installing such updates, see the readme files that accompany software updates
on Cisco.com.
This procedure will destroy all data and install a new image, and you will have to
replace the data by restoring a backup. For information on backups, see the online
help or the User Guide for the CiscoWorks Wireless LAN Solution Engine, Release
2.7.
Although every effort has been made to validate the accuracy of the software
version on the Recovery CD, you must review the WLSE's software versions on
http://www.cisco.com
Readme files included with the updates to perform the update procedure.
This procedure will destroy all data and install a new image. You will need to
replace the data by restoring a backup. For more information, see the online help
or the User Guide for the CiscoWorks Wireless LAN Solution Engine, Release 2.7.
Appendix A
Installing Software—CiscoWorks 1105/1130/1130-19
and download any necessary software updates. See the
78-16345-01
Advertisement
Table of Contents
