Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual page 130

Upgrade Methods
Step 3
Step 4
Install the Software
Step 1
Step 2
Step 3
Step 4
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
A-10
Note The virtual drive (f: in this example) will be removed after you reboot the
Windows 2000, Windows NT, or Windows XP server.
Double-click the virtual drive icon. Then, double-click the autorun.bat file if it
does not automatically run.
A browser window opens and displays the Appliance Update screen. Minimize
this window.
Go to Install the Software, page
In this procedure, you define the repository and install the software.
Procedure
Log in as the admin user via Telnet or SSH on the WLSE to be upgraded.
Enter install mode:
install
install:
Define the repository.
To define a local repository, enter the following command:
•
install:configure default
To define a remote repository, enter the following command:
•
install:configure URL U RL_value
where URL_value is the HTTP URL of the remote repository. For example:
install:configure URL http://209.165.200.224:9851
To view a list of the software images and updates available for installation, enter
the following command:
Appendix A Installing Software—CiscoWorks 1105/1130/1130-19
A-10.
78-16345-01