Table of Contents
Advertisement
Setting Up IOS Access Points
Step 8
Step 9
Note
Using the CLI Interface to Configure WDS Access Points
Tip
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
5-14
Enter a server group name.
b.
c.
From the Priority lists, select the appropriate AAA servers.
If no AAA servers have been entered, click Define Servers to add the servers,
then select the appropriate servers. Consult the AP online help for assistance
in entering AAA servers into the AP.
d.
Under Use Group For, select Infrastructure Authentication.
Configure the WDS AP to authenticate itself to the WDS so that it can participate
in the SWAN hierarchy:
Select Wireless Services > AP.
a.
Select Enable.
b.
Enter a username and password that can be LEAP authenticated by the AAA
c.
servers in the infrastructure server group.
To commit the configuration, click Apply.
To configure authentication for wireless clients, see the AP documentation.
Consult the IOS and access point documentation for details on the subtleties of
IOS commands.
The key steps in configuring the WDS are:
Configure AAA servers to authenticate SWAN infrastructure access points
•
and the WLSE.
Configure WDS.
•
Configure the WNM.
•
Chapter 5
Setting Up Devices—CiscoWorks 1105/1130/1130-19
78-16345-01
Advertisement
Table of Contents
