Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual page 56

Installing the WLSE 1130-19 in a Rack
e.
Figure 3-5
f.
g.
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
3-8
See Figure 3-5. Attach the back end of the rail to the rack.
Attaching Back Rail to Rack
Repeat this process with the other rail and rack assembly.
Extend the middle rail about 30 cm and fasten with screws. See
Then, push the middle rail back into its original position.
Chapter 3 Installing WLSE 1130-19 Hardware
Figure 3-6.
78-16345-01