Import Devices From A Ciscoworks Server - Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual

Discovering Devices
Step 5
Step 6

Import Devices from a CiscoWorks Server

Step 1
Step 2
Step 3
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
6-12
Chapter 6 Setting Up Discovery and Device Management—CiscoWorks 1105/1130/1130-19
If you want to specify timeout and retry values, enter them in the SNMP
•
Timeout and SNMP Retry fields. Otherwise, the default values of a 10-second
timeout and 1 retry will be assigned to the imported devices.
Click Next, or click Cancel to cancel the import.
•
Click Check Last Status to see the results of the last discovery.
•
Click Finish to import the devices listed in the file. A one-time discovery begins
immediately.
Click Check Last Status to see the results of the import.
You can import devices from a CiscoWorks server that is running Resource
Manager Essentials. This import can be immediate or scheduled, and you can
schedule repeat imports. A discovery runs after the import.
Select Devices > Discover > Discover > Discovery Wizard.
Select Import From CiscoWorks and click Next.
Complete the Schedule Import from CiscoWorks dialog.
Enter the following data. All fields are required.
a.
Text Box Description
Host The CiscoWorks server's IP address.
Server Port The port number on which the CiscoWorks server listens for
HTTP requests. You may have to contact the administrator of the
CiscoWorks server for this information.
Username Any user who has the authority to export and import device
credentials on the CiscoWorks server.
Password
For an immediate, one-time import, select Run Now.
b.
c. To schedule a one-time import for a later time or schedule repeated imports:
Select the start date and start time from the pulldown lists.
–
78-16345-01