Table of Contents
Advertisement
Installing the WLSE 1130-19 in a Rack
g.
Figure 3-12 Fastening the Server into the Rack
Warning
This product relies on the building's installation for short-circuit (overcurrent)
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A
(U.S./CAN); 240 VAC, 10A (INTERNATIONAL).
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
3-14
See
Figure
3-12. Push the server to the closed position. If the cable is too
heavy to carry the server, use a screwdriver to adjust the cam so that the cable
management arm is horizontal.
Chapter 3
Installing WLSE 1130-19 Hardware
Statement 1005
78-16345-01
Advertisement
Table of Contents
