Power Up The Appliance; Web-Based Interface; Log In To The Appliance - Cisco S170 Web Quick Start Manual

9

Power Up the Appliance

Power up the appliance by pressing the On/Off switch on the
front panel of the Cisco S170. After the appliance powers up, a
solid green light indicates that the appliance is operational.
10

Log In to the Appliance

You can log in to the Cisco S170 appliance using one of two
interfaces: the web-based interface or the command-line
interface.

Web-Based Interface

For web browser access via the Ethernet port (see the
Step 1
"Connect to the Appliance" section on page
the Cisco S170 appliance management interface by
entering the following URL in a web browser:
http://192.168.42.42
Wait five minutes.
Cisco C170
1
0
12), go to
1
0
Email
Security
Appliance
13