Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual page 32

Hardware Features—WLSE 1130-19
System Indicators
Table 1-1 System Indicators
Indicator
Power
Hard Drive activity
Ethernet 0
activity/link
Ethernet 1
activity/link
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
1-4
1
Power switch with built-in power
indicator
The power switch turns power on or
off. To turn system power off, press
and hold this switch for at least 4
seconds.
2
Floppy disk drive
3
CD-ROM drive
4
Video output or USB port for optional
keyboard
When troubleshooting your WLSE, you might need to check the status of the
indicators on the front panel. These lights are described in
Color Function
Green The power indicator lights up when the WLSE is connected to an
AC power source.
Blue The hard drive activity indicator blinks when hard drive activity
occurs.
Blue The Ethernet 0 activity/link indicator lights up when the
Ethernet 0 port is connected to a network and blinks when activity
occurs on this channel.
Blue The Ethernet 1 activity/link indicator lights up when the
Ethernet 1 port is connected to a network and blinks when activity
occurs on this channel.
Chapter 1 Product Overview
5
Ethernet 0 activity/link
indicator
6
Ethernet 1 activity/link
indicator
7
Hard drive indicator
Table 1-1.
78-16345-01