Cisco CiscoWorks Wireless LAN Solution Engine Installation And Configuration Manual page 105

Chapter 5 Setting Up Devices—CiscoWorks 1105/1130/1130-19
Click Add Entry. In the Add AAA Client area, enter the following WLSE
Step 6
information:
Note
Field
Client Hostname
Client IP
Key
1. If you are using redundant WLSEs, enter the VIP address. For more information about WLSE
2. You will need this key when configuring the WLSE.
Select RADIUS (Cisco Aironet) from the Authenticate Using list.
Step 7
If you are using this server for Wireless Domain Services (WDS) authentication,
Step 8
configure the server for simultaneous login sessions. See the ACS server
documentation for details.
Click Submit or Submit+Restart. A restart is required for the changes to take
Step 9
effect.
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
78-16345-01
If two Ethernet interfaces are configured with IP addresses on the WLSE,
both addresses must be configured as clients on ACS server.
redundancy, see the online help or the User Guide for the CiscoWorks Wireless LAN Solution
Engine, Release 2.7.
Description
WLSE hostname.
1
WLSE IP address.
2
Secret key.
Setting Up AAA Servers
5-27