Sending A Delayed Fax - Xerox DocuPrint M205 b User Manual

Sending a Delayed Fax

The Delayed Start mode can be used to save scanned documents for transmission at a specified time
to take advantage of lower long distance rates.
1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass and close the document cover.
See also:
• "Loading an Original Document on the ADF" on page 262
• "Loading an Original Document on the Document Glass" on page 263
2
Press the (Fax) button.
3
Adjust the document resolution to suit your fax needs.
See also:
• "Resolution" on page 264
• "Lighten/Darken" on page 266
4
Select Delayed Start, and then press the
5
Select On, and then press the
6
Enter the start time using the numeric keypad or press the
and then press the
7
Select Fax to, and then press the
8
Select Keypad, and then press the
9
Enter the number of the remote machine using the numeric keypad, and then press the
button.
You can also use speed dial or group dial numbers.
See also:
• "Automatic Dialing" on page 289
10
Press the (Start) button.
Once the Delayed Start mode is activated, your printer stores all the documents to be faxed to its
memory and sends them at the specified time. After faxing in the Delayed Start mode is complete, the
data in the memory is cleared.
button.
button.
button.
button.
button.
or
Faxing (DocuPrint M205 f/M205 fw Only)
button to select the start time,
272