Protrudent/Bumpy Paper - Xerox DocuPrint M205 b User Manual

Protrudent/Bumpy Paper

Problem
Printed surface got
protrudent/bumpy.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
393 Troubleshooting
Action
Clean up the fusing unit.
1 Load one sheet of paper on the MPF, and then print a solid image
all over paper.
2 Load the printed sheet with the side to be printed on facing down,
and then print a blank sheet of paper.