Xerox DocuPrint M205 b User Manual page 130

Xerox printers user guide
Table of Contents

Advertisement

• Connecting to Access Point Network
To configure the wireless settings through an access point such as a wireless router:
1
On the operator panel, press the
2
Select Admin Menu, and then press the
3
Select Network, and then press the
4
Select Wireless Setup, and then press the
5
Select Manual Setup, and then press the
6
Enter the SSID, and then press the
Use the numeric keypad to enter the desired value, and press the
cursor.
7
Select Infrastructure, and then press the
8
Select an encryption type, and then press the
IMPORTANT:
Be sure to use one of the supported encryption methods to protect your network traffic.
9
Enter the WEP key or pass phrase, and then press the
Use the numeric keypad to enter the desired value, and press the
cursor.
When you select WEP(64Bit) or WEP(128Bit) for an encryption type at step 8, select a
transmit key after entering the WEP key.
10
Wait a few minutes until the printer restarts to establish the wireless network.
11
Print a System Settings page from the operator panel.
See
"Printing a System Settings Page" on page
12
Confirm that "Link Quality" is shown as "Good", "Acceptable" or "Low" on the report.
NOTE:
When "Link Quality" is "No Reception", check if the wireless settings are correctly configured.
129
Printer Connection and Software Installation
(System) button.
button.
button.
button.
button.
button.
button.
button.
182.
or
button to move a
button.
or
button to move a

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint m205 fwDocutprint m205 f

Table of Contents