• Ethernet Cable
1
Select Ethernet Cable, and then click Next.
2
Follow the on-screen instructions, and then click Next.
The Printer Setup Utility screen appears.
3
Select the printer to be configured in the "Select Printer" screen, and then click Next.
NOTE:
•
If the printer to be configured is not listed in the "Select Printer" screen, try the following steps:
-
Click Refresh to update the information.
-
Click Enter IP Address, and then enter the IP address of your printer.
4
Enter the SSID.
5
Select Type of wireless network.
6
Configure the security setting, and then click Next.
The "IP Address Settings" screen appears.
7
Select IP Mode depending on your network scheme.
When IPv4 is selected, configure the following:
Select Type.
a
If you have selected Use Manual Address from Type, enter the following items:
b
•
IP Address of your printer
•
Subnet Mask
Printer Connection and Software Installation
98