Scan Defaults - Xerox DocuPrint M205 b User Manual

• Multiple Up
Purpose:
To print two original pages to fit onto one sheet of paper.
Values:
Off*
Auto
ID Card Copy
Manual
• Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
4 mm*/0.2 inch*
0-50 mm/0.0-2.0 inch
• Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Values:
4 mm*/0.2 inch*
0-50 mm/0.0-2.0 inch
• Margin Middle
Purpose:
To specify the value of the middle margin.
Values:
0 mm*/0.0 inch*
0-50 mm/0.0-2.0 inch

Scan Defaults

Use the Scan Defaults menus to configure a variety of scanner features.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Does not perform Multiple Up printing.
Automatically reduces the original pages to fit onto one sheet of
paper.
Prints the original pages onto one sheet of paper in the original size.
Prints the original pages onto the one sheet of paper in the size
specified in Reduce/Enlarge.
Specify the value in increments of 1 mm/0.1 inch.
Specify the value in increments of 1 mm/0.1 inch.
Specify the value in increments of 1 mm/0.1 inch.
Using the Operator Panel Menus and Keypad 342