Sending The Scanned File To The Network - Xerox DocuPrint M205 b User Manual

Sending the Scanned File to the Network

1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass.
See also:
• "Making Copies From the ADF (DocuPrint M205 f/M205 fw Only)" on page 194
• "Making Copies From the Document Glass" on page 192
2
Press the (Scan) button.
3
Select Scan to Network, and then press the
4
Select Scan to, and then press the
5
Select Computer(Net) or Server(FTP), or Search Address Book, and then press the
button.
Computer(Net): Stores the scanned image on the computer by using the SMB protocol.
Server(FTP): Stores the scanned image on the server by using the FTP protocol.
Search Address Book: Select the server address registered in Address Book.
6
Select the destination to store the scanned file in, and then press the
7
Select scanning options as required.
8
Press the (Start) button to send the scanned files.
243 Scanning
button.
button.
button.