Table of Contents
Advertisement
• For Fixed IP Networks:
1
Set up your computer for wireless connectivity:
NOTE:
•
If the operating system on your computer provides a wireless configuration software, use it to change the
wireless settings. See the instructions below.
For Windows XP and Windows Server 2003:
Select Network Connections from Control Panel.
a
Right-click Wireless Network Connection and select Properties.
b
Select the Wireless Networks tab.
c
Ensure that the check box for Use Windows to configure my wireless network settings is
d
selected.
NOTE:
•
Be sure to write down the current wireless computer settings in step f and step h so that you can restore
them later.
Click the Advanced button.
e
Select Computer-to-computer (ad hoc) networks only and close the Advanced dialog
f
box.
Click the Add button to display Wireless network properties.
g
On the Association tab, enter the following information and click OK.
h
Network name (SSID): xxxxxxxx (xxxxxxxx indicates a wireless device's SSID which you
use)
Network Authentication: Open
Data encryption: Disabled
Click the Move up button to move the newly added SSID to the top of the list.
i
Click OK to close the Wireless Network Connection Properties dialog box.
j
For Windows Vista:
115
Printer Connection and Software Installation
Advertisement
Table of Contents
