Sending a Fax Manually
1
Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass and close the document cover.
See also:
• "Loading an Original Document on the ADF" on page 262
• "Loading an Original Document on the Document Glass" on page 263
2
Press the
(Fax) button.
3
Adjust the document resolution to suit your fax needs.
See also:
• "Resolution" on page 264
• "Lighten/Darken" on page 266
4
Select OnHook, and then press the
5
Select On, and then press the
6
Enter the fax number of the remote fax machine using the numeric keypad.
•
If the document is loaded on the ADF, press the
•
If the document is not loaded on the ADF, press the
setting, and then press the
NOTE:
•
Press the
(Stop) button to cancel the fax job at any time while sending the fax.
269
Faxing (DocuPrint M205 f/M205 fw Only)
button.
button.
(Start) button.
button.
(Start) button, select the desired